Microsoft Certification and Cisco Certification Practice Tests! MCSE and CCNA Sample Questions and Exams!

2. By looking at the configuration, Which additional command must be issued on the Branch router before interesting traffic will be sent to the Remote router?

Hostname: Branch Hostname: Remote
PH# 123-6000, 123-6001 PH# 123-8000, 123-8001
SPID1: 32055512360001 SPID1: 32055512380001
SPID2: 32055512360002 SPID2: 32055512380002

isdn switch-type basic ni
username Remote password cisco
interface bri0
ip address 10.1.1.1 255.255.255.0
encapsulation ppp
ppp authentication chap
isdn spid1 41055512360001
isdn spid2 41055512360002
dialer map ip 10.1.1.2 name Remote 1238001
dialer-list 1 protocol ip permit

A. (config-if)# dialer-group 1
B. (config-if)# dialer-list 1
C. (config-if)# dialer map 1
D. (config-if)# dialer-route 1

Answer: A

The "dialer-group #" command tells the access-list (used with the dialer-list # command), which interface to activate when it finds interesting traffic. The numbers at end of each command must match.

<< previous

next >>

Todd Lammle, best known for over 30 award winning Sybex Study Guides on the Cisco and Microsoft networking environments, teams up with Redmond Exams to offer some of the toughest PREP Tests available. The Sample Questions are from our CCNA exam.

All Exam questions are based on the Real Cisco Exam questions!